Overview
Flat-plate collectors with an SS304 tank and electric backup, for family homes. The Pecol Solar Hot Water System is part of Pecol's Solar Water Heaters range (solar water heaters). Size range: 300 L (66 gal).
All details on this page come from the Pecol solar hot water system brochure. Download the Solar hot water system brochure (PDF) for drawings and installation notes.
Key features
Ultra fast heating
Large collector surface traps solar energy faster for constant hot water.
Extra energy saving
Low-iron tempered glass and an ultra-black chromatic "Perfect Bank" UBC collector absorb more sunlight.
Best insulation
Pressure-injected high-density polyurethane foam keeps heat in.
Hot water all year round
Built-in electric backup element for the monsoon season and rainy days.
Prolonged hot water temperature
A soft-flow water spreader stops cold make-up water mixing with the hot water.
Tougher protection
UV-treated air-tight seal around the tank keeps out rain and corrosive particles.
Slim, modern design
Blends with any roof profile. Robotic welding and quality brass fittings mean it is maintenance free.
Technical specifications
| Item | Specification |
|---|---|
| Total capacity | 66 gal or 300 L |
| Overall length / width / height | 2439 mm / 2286 mm / 508 mm |
| Outer tank diameter / length | 508 mm / 2296 mm |
| Nominal working pressure | 500 kPa |
| Cylinder test pressure | 1500 kPa |
| Relief valve setting | 700 kPa |
| Weight empty / full | 128 kg / 432 kg |
| Outer cylinder case | Zincalume |
| Thermostat | Sunvic |
| Tank insulation | Polyurethane, high-pressure injection, about 10 kg |
| Inner tank | 2133 mm body, Ø410 mm, 1.5 mm SS304 |
| Soft-flow water spreader | Ø30 mm × 1.6 m, stainless steel |
| Glass | 4 mm low-iron clear tempered, 994 × 1918 mm, rockwool insulation |
| Item | Specification |
|---|---|
| Size (L × W × H) | 1930 × 1003 × 51 mm each; 2199 mm wide as a pair |
| Absorber plate | Tube & fin, 1.2 mm aluminium, ultra black chromatic coating |
| Net absorber area | 2 m² per collector |
| Absorber / emission coefficient | 0.95 / 0.1 (±0.02) |
| Riser tubes | 6 per collector, 0.71 mm, thermal bond, 139 mm spacing, brazed joints |
| Panel to panel joint | 22 mm compression fitting |
| Leak / over-pressure test | 800 kPa / 1500 kPa |
| Collector casing | 0.45 mm Zincalume, 2 vent holes, 15 mm trim depth |
| End caps | 0.9 mm powder-coated steel with UV-protected EPDM seals |
Specifications are from the manufacturer's brochure and may change without notice. Please confirm with our engineers before ordering.
Where it is used
- Terrace, semi-D and bungalow roofs
- Families of 4 to 6 people
- Homes that want to cut electricity bills with free solar energy
Pecol Solar Hot Water System price and quotation
Prices depend on the size, installation and site conditions, so we quote each project individually. Tell us how many people or rooms you need hot water for, and our engineers will recommend the right model and send you a free quotation.
